The enterprise distribution room is a location where safety management needs to be strengthened. The following figure is a schematic diagram of the overall solution:
Attached safety management board for distribution room on the wall
Safety equipment to be equipped in the distribution room:
Safety warning signs, ground marking, fire alarm system, fire extinguisher (generally CO2, dry powder is used at the transformer), rat guard, insulating mat, insulating gloves, insulating boots, protective helmets, high and low voltage megger, electroscope, insulating pull rod, etc., of which the last several protective and safety articles can generally be centralized in the duty room, and carried or worn by operators to the distribution room for professional operation.
Distribution Room Safety Management System
1. The power distribution room should do a good job in lightning protection, rain prevention, fire prevention, and small animal prevention. Pay attention to closing doors and windows at will, and regularly check the protection of protective nets and sealing strips.

2. The power distribution room should be equipped with all fire-fighting equipment and insulation equipment, neatly placed, regularly inspected, and maintained in good condition; Management personnel are proficient in using fire-fighting equipment.

3. The operation of power distribution equipment should be strictly carried out by professional personnel in accordance with the operating procedures, and other personnel present should only be monitored and not interfere; It is strictly prohibited for two people to operate simultaneously to avoid accidents.

4. Smoking is strictly prohibited in the power distribution room, and it is strictly prohibited to bring flammable and explosive hazardous materials into the power distribution room.

5. Maintenance personnel or other personnel who need to enter the power distribution room must obtain the consent of the management personnel before entering.

6. Management personnel should regularly inspect the operation of facilities and equipment, identify hidden dangers, and arrange professional personnel to handle them in a timely manner to ensure normal and safe power supply.

7. Management personnel should keep the floor, window sills, and equipment surfaces of the distribution room clean and dust-free.